Ultra low range differential pressure from 0.001 Pa up to 40 kPa
Gauge pressure to 4 MPa
Air and gas flow from 0.1 ml/min to 2000 litres/min
Calibration Services and Calibration Instruments
Endüstriyel ve bilimsel yaşamın her alanında hassas ölçüm giderek daha önemli hale geliyor. Ürünler gittikçe daha sıkı toleranslara göre üretiliyor, süreçler en yüksek verimlilikte çalışacak şekilde optimize ediliyor ve çevresel ölçümler gerçek çalışma koşullarını yansıtacak şekilde geliştiriliyor. İşte tam da bu yüzden artık ölçüm doğruluğu daha kritiktir . Bu da, uluslararası standartlara göre izlenebilirliği haiz doğru kalibrasyona bağlıdır.
Furness Controls uzun yıllardır ultra düşük aralıklı fark basınç ve hava akışı ölçümü alanlarında doğruluk ve kalibrasyon standartları çıtasını sürekli yükseltmektedir. İster cihazlarınızı kalibre etmek için bir hizmet sağlayıcı arıyor olun , isterse işi kendiniz yapmak üzere bir kalibratör arıyor olun, Furness Controls size yardımcı olur.
Bexhill'deki kalibrasyon laboratuvarımızda ve Tamworth'taki Birleşik Krallık Hizmet Merkezimizde UKAS ve ulusal ölçekte izlenebilir kalibrasyon hizmetleri sağlıyoruz. Ayrıca Taşınabilir Kalibratörlerimizle sahada da izlenebilir kalibrasyonlar gerçekleştirebiliyoruz. Aşağıdaki kalibrasyon hizmetleri laboratuvarlarımızdan temin edilebilir.
Services We Offer
Repair & Calibration
Our main U.K. Service Centre is strategically placed in Tamworth Staffs, central to our customers in the United Kingdom and able to respond readily in support of our customers. Leak Detectors are Production Line Test Equipment, in use sometimes 24 hours a day and the need for quick service is paramount. Tamworth offers not only a repair and calibration facility, but a team of field service engineers, ensuring that production lines continue to run. Our staff at Tamworth work continuously to ensure that equipment is put back in service as quickly as possible.
Maintenance Contracts
Leak test equipment needs maintaining in a fit condition, preventing wherever possible a loss of production. Our Maintenance Contracts are designed to provide a "call out service" and regular maintenance visits, which can include calibration and preventive work, ensuring the equipment’s maximum availability.
Customer Training Courses
Additionally Furness Controls runs customer training courses to enable maintenance in the task of keeping production running.
Product Evaluation Service
Other facilities at Tamworth include a product evaluation service, recommending the correct system to test a wide variety of products using our 50 years experience in leak test applications.
Field Servicing
For field servicing please contact our engineers in Tamworth.
Our Calibration Instruments
See the instruments and flow elements we offer for Low Differential Pressure and Flow Calibration:
Primary Calibration Standards
The unique Furness Controls primary pressure standards enable us to provide the exceptional accuracy of our low pressure and vacuum calibrations. These standards which are used in our own calibration laboratories, enable us to provide calibrations with full traceability to national standards. They have also been adopted by numerous national and accredited laboratories throughout the world.
The Furness Rosenberg Pressure Standards - The FRS4
The FRS4 is an ultra-low primary pressure standard utilising a unique piston gauge design. The piston is supported on an electronic balance which reads the resultant force from the pressure acting on the piston. Measurements can be made from 0.001 Pa to 40 kPa.
The Gravimetric and the Bell Prover
The Gravimetric Flow Standard and the Bell Prover provide the UKAS Accredited flow standards at our laboratory. The Gravimetric weighs air and gives direct traceability to mass. Flow values down to 0.1 ml/min can be calibrated with uncertainties of no more than 0.5 % of reading. The Bell Prover is a direct displacement device with a capability of up to 2,000 litres/min. Traceable calibrations of up to 10,000 litres/min are also available.